Nexug Industries Private Limited

• Machine frame made of modular aluminium profile system
• Upper machine cover:
• Swing doors, easy to open, with safety switch, frame elements made of transparent, impact?resistant polycarbonate
• Clear view during profiling process
• Easy access for adjustment and service
• Mobile, two fixed and two swivel castors with brakes
• 230 V motor with frequency converter for continuously variable working speed: 0–12 m/min (0–40 ft/min)
• Forward and backward run

• Fabrication of the profile for the single or double-lock standing seam

• Working width between 290 and 810 mm/11.5? and 32" continuously adjustable by hand wheel over two spindles
• Inlet guides easily and precisely adjustable (measure correction on the profile)
• Clean profile, poor in tension, made by eight hardened roll forming stations
• 8th forming station for aligning the panels and for curving the panels – convex or concave – smallest radius about 6 m/20"
• Cut proof, extremely resilient polyurethane coated drive rollers
• Electromechanic preset counter – safely placed within the frame

• Also for profiling short (min. length about 500 mm/20") or tapered panels

• For double lock seaming in one pass
• Two additional rolls K9-WR for single lock seaming are available
• Sheet metal, aluminum, copper, zinc weathered or coated up to 0,8 mm; stainless steel up to 0,5 mm
• Adjustable for seam heights 25-60 mm
• Clean transition at cross seams by using variable pressure adjustment K9-1-ASS
• Working speed 5,5-13 m/min. up the wall and on the roof
• Maintenance-free, safe operation
• No damage to painted or coated sheets
• Can be used or removed in the middle of a seam (preliminary hand-seaming required)
• Accessory: dual safety switch for safe operation at the wall and roof. The Power Seamer stops utomatically at the end of the seam, against a wall or obstruction
• Barrel curved roofs can be seamed using single or double lock system to the minimum radius 1,2 m
• Seam cutting can be accomplished by using cutting rolls K9-1-AR for roof and wall renovation and repairs

Specifications:

• Easy to handle
• No damage to painted or coated sheets
• Complete equipped , no options or extra’s necessary
• Ergonomic working height
• Exact pressure adjustment
• Emergency switch

• Forward and backward run
• Variable pressure adjustment
• For different materials
• No damage to painted or coated materials
• Also for curved panels:

• The PROFIMA - 25 is a fully mobile pan former ideal for both the workshop and for on-site operation.
• All functions and adjustments are positioned to one side of the machine. It is easy to transport, light weight with two castors mounted on frame. This saves on freight costs, shortages and the need for difficult leak prone panel end laps.
• The guillotine-shear K25-QMT cuts panels without distortion and burr-free.
• equipped with 4 crane lifting eyes.
• The PROFIMA – K 25 produces standard 25 mm seam height panels in widths from 290 mm up to 800 mm plus tapered panels.

• The PROFIMA - 25 is a fully mobile pan former ideal for both the workshop and for on-site operation.
• All functions and adjustments are positioned to one side of the machine. It is easy to transport, light weight with two castors mounted on frame. This saves on freight costs, shortages and the need for difficult leak prone panel end laps.
• The guillotine-shear K25-QMT cuts panels without distortion and burr-free.
• equipped with 4 crane lifting eyes.
• The PROFIMA – K 25 produces standard 25 mm seam height panels in widths from 290 mm up to 800 mm plus tapered panels.

Specifications:

• No damage to painted or coated sheets.
• Clean transitions at the clips, due to disc - spring-washer technology (aligns itself on thicker materials).
• Variable pressure adjustment K9-1-ASS for an optimum seam.
• Barrel shaped – or vaulted roofs, a radius from 2,0 meter and up can be closed.
• Can be used in the middle or removed from the seam.
• To dismantle for restoration, repair, or to open up a seam, use the Fold Opening Roll K9-1-ERB-AR.
• As an option, Remote Control K9-1-KF, for forward-stop-reverse operation.

Specifications:

• Closes the profile in both directions
• Clever system of eccentric lever with disc springs
• adjustment of the pressure if necessary > clean and precise result regardless of material
• Simple removal of the tool from seam by relieving pressure – at any time and without scratching
• Ergonomic handholds above and on both sides of the tool
• Forming rollers of stainless steel
• Rope-tying device included
• Carrying case included

• Adjustable for different seaming heights
• Closes straight from start of trays – can also be used for small roof surfaces, slanting, angular and off-set elements
• Single- or double-lock standing seam in one working cycle
• For round roof surfaces (domed roofs) down to min. radius of 0.2 m/8"
• Small width of tool – about 17 cm/6.7" – allows seaming even in narrow spaces
• Can be removed from seam at any time
• Carrying case included

Nexug Trapezoidal Roof Seam Locker is kind of Handheld/Semi Automatic Roof Seam Locker machine, which work on Rollers to Closer Trapezoidal Seams at Site or Workshops.
TECHNICAL SPECIFICATIONS
Sheet Thickness Range - Max 0.8mm
Sheet Material - Aluminum/GI/Copper/Zinc
Seam Type - Standing Trapezoidal Seam
Locking - Roller Five Set Roller
Power Supply - 220V, Single Phase, 50Hz
Total Power - 2400Watt
Weight - 35 Kg

• Handy power tool for making the profile for single and double-lock standing seams on bent panels.

• Adjustable for different edging heights (min. profile height 25 mm/1")

• Profiles straight from start of strips - can also be used for small roof surfaces as well as slanting, angular and off-set elements
• Also for separate profiling of both sides of the panel
• Even allows for profiling on narrow surfaces: minimum distance from seam centre to seam centre (bay width) about 80 mm/3.2"
• Standard tool for round roof surfaces (domed roofs) up to a min. radius of 2 m/79"
• Smaller radius (min. 0.8 m/32") by using a round rail

• To be used in the workshop and at site