Nexug Industries Private Limited

• The benefits of the Bevel Mate concept
• Faster weld preparation, beveling and rounding
• Long service life of the bevel heads
• Lightweight and handheld chamfering machines
• Consistent and high quality results
• Minimum physical effort
• Safe and healthier working
• The best choice for beveling and rounding

• Max. bevel width:

• Bevel angle:

• Rounding Radius:

• Motor: 1.700 W
• Speed:2700-8500 RPM
• Overload protection: thermal
• Feeding: manual
• Weight: 6 kg / 13.2 lb

• For conventional steel (up to strength 700 MPa / 101 526 PSI), stainless steel, brass, copper and aluminium materials.
• The bevelled material thickness 6 to 60 mm /0.23 to 2.36 in.
• The bevel angle can be adjusted by removable arms (KIT for a given angle).
• The device is able to perform the double-sided bevel (X, K), without any need for material handling.
• Suprisingly silent drive.
• The machine is equipped with the automatic feed.
• The possibility of stationary and mobile use.
• 3D Manipulator allows to adapt UZ29 Speeder for any unevenness of deformations in the length of machined material. It also allows to work on uneven floor.
• Smaller parts of the material are inserted directly into the machine.
• One-man machine.

• UZ15 RAPID creates welding-ready bevels on linear plates of any shearable material, including iron, steel (up to 85,000lbs/in² or 60kg/mm2), stainless steel, brass, copper and aluminium. It cuts bevels from 3/16 to 1-9/16" (5 to 40 mm) in thickness, with a minimum plate width of 2-3/4" (70 mm) and minimum plate length of 5-7/8" (150 mm).
• The beveling angle adjusts continuously from 15° to 50° without replacing any parts. The pressure bar unit and the piece supporting unit can be adjusted in height and are supplied with visible graduated scales.
• It can be hooked to the piece to be machined in either a horizontal or vertical position. When used with the trolley, the machine can be inverted in order to bevel the bottom side of the plate. Both X and K bevels are possible.
• Easily attaches to trolley 180°
• Inversion allows for creation of a double-sided bevel - no need to rotate or flip heavy material
• Assembles or disassembles in seconds without tools with a unique clamping system - Lift handle on trolley adjusts machine to working height
• Functions as a stationary or a moveable station
• Package discount available when machine and trolley are purchased together

• Maniulator provides a simple, quick turn the UZ15 RAPID of 180°for create double-sided bevels XK. The operator does not need a crane to rotate of material. There is a significant time saving at work.
• Unique clamping system allows machine UZ15 RAPID assemble and disassemble (Quick System) within few seconds without using any tools. the beveler UZ15 RAPID is "floating" on MANIPULATOR 3D and compensates unevenness of the floor
• MANIPULATOR 3D allows easy manipulation with beveler
• Required height of machine can be set up by MANIPULATOR 3D by lift handle
• Travel is provided by massive wheels mounted on the carriage
• Possibility to bevel with MANIPULATOR 3D or without
• Possibility to use the MANIPULATOR 3D like stationary station

• Automatic feeding, automatic feed speed adjustment with inverter, 0 -1,2m/min
• High speed milling head with very resistant inserts, max. width of bevel 62mm/15°, 50mm/45°
• 15-60° infinitely variable angle, without replacing any parts
• The electric circuit is enclosed in a dust proof box and is equipped with all the safety devices necessary.
• CE conformity declaration
• Unique MANIPULATOR 3D - manipulator provides a simple quick turn qa of 180° to create double sided bevel X K. The operator does not need a crane to rotate the material. There is a significant saving of work time.
• The unique clamping system allows the machine UZ 50 Triumph to be assembled and disassembled (Quick System) within a few seconds without using any tools
• The beveler UZ 50 Triumph is "floating" on MANIPULATOR 3D and compensates the unevenness of the floor or the deformations of the steel plate.
• MANIPULATOR 3D allows the easy manipulation with beveler
• The required height of the machine can be set up by MANIPULATOR 3D by lift handle
• The movement of the machine is provided by massive wheels mounted on the carriage
• The possibility to bevel with MANIPULATOR 3D or without
• The possibility to use the MANIPULATOR 3D like a stationary station
• EQUIPMENT for bevelling small flat steel
• Equipment is intended for use with the machine UZ50 TRIUMPH
• With the equipment is machine UZ50 TRIUMPH possible use for processing small workpieces
• The machine UZ50 TRIUMPH maintains a continuously adjust the bevel angle between 15°- 60°

• Ergonomic two-handed operation
• Huge power for all applications
• Straight edges, contours, boreholes
• Excellent price
• 30°, 45°, 50°, 60°other on demand
• Made in Czech Republic by NKO MACHINES

Technical description:

• The beveler B15 AIR is a heavy-duty hand held pneumatic beveler which uses 6 indexable carbide inserts. The design allows straight edges, contours and contours to be beveled with ease, suitable also for radius.
• High performance pneumatic motor offers huge power for all applications
• Works with steel, stainless steel, aluminium, copper, plastic and other materials.
• The precision dial scale allows precise adjustment of the chamfer height.
• Replacable the tool holder for angle 30°, 37,5; 45°, 50°, 60°other angles on demand.

• Scale for accurate bevel size adjustment.
• For bevelling and deburring steel, aluminium and other materials.
• Replaceable head for changing bevel angle.
• Handheld powerful equipment.
• Swivelling ergonomic handle.
• Edge rounding function, preparation before surface treatment.
• Manufactured in Czech Republic, with a high performance German manufactured the motor.

• Automatic workpiece clamping system.
• Infinitely adjustable tool speed.
• Infinitely variable machine feed speed.
• 2 built-in displays showing cutting conditions.
• Possibility of adjusting the height of the machining unit according to the position of the workpiece.
• Tool adjustment in three axes. Unique cross feed.

• Automatic workpiece clamping system.
• Infinitely adjustable tool speed.
• Infinitely variable machine feed speed.
• 2 built-in displays showing cutting conditions.
• Possibility of adjusting the height of the machining unit according to the position of the workpiece.
• Tool adjustment in three axes. Unique cross feed.

• Powerful, stationary bevelling and deburring machine for the efficient bevelling of flat steel, plates and profile material.
• For all carbon steels, cast iron, aluminium and light metal alloys, non-ferrous metals and all cuttable materials.
• The feed permits bevel machining without tight camping of the workpiece.
• The swiveling milling spindle permits a milling angle within a continuous range of 30° - 60°.
• Regulation of feed speed and cutting tool
• Option to buy additional accessories such a milling devide for pipes, table extension left and right (total 2800 mm) with adjustable sidestops left and right

• The mechanically reduced machine speed contributes to longer life of the cutting inserts.
• Possibility to combine the machine with Xpipe.
• More comfortable guiding of the machine over the material.
• Possibility to buy a clamp for inlet and outlet plate. Allows for safe and comfortable entry of the machine onto the workpiece.
• Machine load LED indicator.
• LED indicator for required carbon replacement.

• High performance motor
• Continuously adjustable working angle from 0° - 60°
• The machine is able to perform FACING - machining edges under angle 0° to remove unwanted material layer after plasma or oxygen cutting.
• Very compact and ergonomic design allows achieving high productivity during work.
• Unique bevel size adjustment mechanism increases accuracy of the work.
• Circumferential protection frame protects the machine in case of fall and allows more options on how to grip the machine while working.
• With tube accessory can be beveled pipes and tubes to Ø 600mm.

• Deburring angle: 45deg
• Deburring width: max 2mm
• Rounding size: R 1,5mm
• Speed: 23000 RPM
• Air consumption: 320 l/ min
• Feed: manual
• Dimensions: 112x60x48mm
• Weight: 400g

• Deburring machine B2 AIR ( Including of the milling head)
• Tools needed for operation
• Paper Box
• Operation manual

• Scale adjusting of the cut
• Protective security guards
• Adjustable angle chamfers
• For steel, stainless steel, aluminum and other materials.
• Exact massive and luxuriously long plate fences.

• Bevel angle: 30° - 60° infinitely adjustable
• Bevel width: 0 - 3 mm / 0 - 0.12 in
• Voltage:
  400V/ 50 Hz/3phase
  110V/50 Hz/ 1phase
• Power of motor: 1,3 kW
• Router speed: 3 600 ot./min
• Feed: hand operated
• Weight: 31kg
• Dimensions: 530x420x410mm
• Number of inserts: 5 pcs (square)

• For steel (strength up to 700 MPa), brass, copper and aluminium.
• For bevelling material with minimum dimensions - width 70 mm/2,76", length 150 mm/5,91", thickness 6 mm/0,24".
• Thickness of bevelled material 6 - 40 mm/0,23"-1,58".
• The bevel angle is easily adjustable from 15° to 50° - smoothly, without the need to replace any part.
• The equipment is capable of performing double-sided bevelling (X, K) without the need for material handling.
• Easy connecting to the 3D Manipulator for easier operation and handling.
• The machine is equipped with an automatic feed.
• The possibility of stationary and mobile use.
• The machine works on large workpieces without support.
• Smaller parts of the material are inserted directly into the machine.
• An advantageous price when purchasing UZ 18 Hardworker together with the 3D Manipulator.

• Unique MANIPULATOR 3D - unique design of the manipulator offers the possibility of a simple turning of the beveling machine by 180 ° for performing the X, K double-sided bevel. No tools required to rotate. No need for material handling = significant time savings.
• The quick-connect system offers the option to connect and disconnect the UZ 18 Hardworker from the 3D Manipulator within seconds without the use of any tools. You will appreciate this in a situation where the 3D Manipulator cannot follow the machine due to the poor quality of the working floor.
• The machine is then able to travel along the material itself. The 3D manipulator system allows for the machine to adapt its working position to the actual workplace situation.
• The UZ 18 Hardworker “floats” on a machined sheet metal and compensates for any floor unevenness or material deformation.
• The 3D manipulator also ensures convenient transport of the machine at the workplace.
• The lifting mechanism allows for easy adjustment of the working height of the machine.
• Large castors guarantee comfortable overcoming of obstacles and unevenness.
• Optional working with or without 3D Manipulator.
• The option to use the 3D Manipulator as a fixed workstation for small work pieces machining or as a UZ 18 Hardworker Service Holder.
• Technical data:
  Max. bevel width : 18 mm (600 MPa)Continuously adjustable angle: 15° - 50°Thickness of bevel. material: 6 - 40 mmEngine: 750 W / 380 VFeed: 1,9 m/min.Weight: 110 kgDimensions (WxHxD): 43,8 x 71,9 x 64,4 cm

• UZ12 ULTRALIGHT creates welding-ready bevels on linear plates of any shearable material, including iron, steel (up to 60kg/mm2 or 85,000lbs/in²), stainless steel, brass, copper and aluminum. It cuts bevels from 3 to 35mm in thickness, with a minimum plate width of 60 mm and minimum plate length of 60mm.
• The Beveling of the tubes from ID 95mm.
• Incredibly silent running of the machine.
• The beveling angle adjustable by the help of the kit for needed angle. Available are kits for 30; 45; 37,5; 22,5 and 50 degrees.
• The pressure bar unit and the piece supporting unit can be adjusted in height and are supplied with visible graduated scale.
• It can be hooked to the piece to be machined in either a horizontal or vertical position. The machine can be inverted in order to bevel the bottom side of the plate. Both X and K bevels are possible.
• The total weight of the machine is very low and only one person is necessary for operation of our UZ12 Ultralight
• Inversion allows for creation of a double-sided bevel – no need to rotate or flip heavy material
• Functions as a stationary or a moveable station

• Working range max.bevel : 12mm
• Bevel angle : 30°; 45°; 22,5°; 37,5°; 50°( exchangeable angle kit) other angles on demand
• Thickness shearable materials : from 3 to 35mm
• Engine : 400W
• Speed of feeding : 1,8m/min
• Machine weight : 30kg
• Dimensions : 470 x 294 x 523mm

• Tilting table for easy attachment of B10 Electra or B15 Electra
• Vertical position of the table for convenient pipe beveling
• Straight edge and pipe guide attachments included in the price
• Adjustable protection shield increases work safety
• Robust design insures precision beveling and durability of the B-Dock
• The Hardox work sufrace is wear resistant
• Light weight system is easy to transport
• Can be used with B10 Electra or B15 Electra machines
• Manufactured in Czech Republic